YY-5035 compatibility lubricant for rubber
Release time：2025-05-06 16:01 browse：
A, technical indicators:
Appearance: white or light yellow powder and granular
High melting point, low melting point 75 ℃ or higher, melting point 150 ℃ or higher
The CPS viscosity: 250-250
Decomposition temperature: 290 ℃ or higher
Density: 0.92 g/cm3 or less
Product introduction:
YY - 5035 is a high-performance multi-functional plastic additives, the chemical synthesis technology and the function of the use of special composite technology, will have a rock and capability of organic functional groups grafted on the polymer, dispersion, compatibility, coupling, lubrication multi-function at an organic whole, good processing AIDS is very versatile.
Third, scope of application:
1, improve the natural rubber, synthetic rubber (such as: nitrile rubber) processing performance, can be better dispersed filler and solve the compatible problem of filler and resin, improve the melt index, make apparent products performance and better physical properties are improved.
2, used in tires and pneumatic sealing ring production, promote wear uniform dispersion of carbon black and activated coating, to improve the compatibility of rubber with carbon black, prevent precipitation.
3, can be added directly used in plastic injection products, improve liquidity and apparent, reduce product defective rate.
Four, application effect:
1, of the inorganic filler with a strong affinity, make its fully activated modification, destruction and prevent agglomeration of inorganic matter, which is more evenly dispersed in the polymer, thus can improve the addition amount of filler, at the same time rely on the strong interface key cooperation, to achieve the effect of toughening reinforcement.
2, used in the processing of polymer composites, can effectively improve the compatibility of system components, promote the plasticizing and lower melt viscosity, improve processing flow, reduce the processing equipment of torque, reduce the process energy consumption, improve the production efficiency. And can improve the impact strength and elongation at break of the product, such as mechanical properties, at the same time significantly improve product surface gloss.
3, because this product is highly reactive multifunctional structure of anchor groups, through multipoint adsorption of the groups "anchor", at the same time for chemical reaction was carried out on the filler particle surface modification, achieve completely coated surface chemical reaction, make the organic filler surface, which can effectively reduce the surface of the packing, cut off between packing together. In addition, the product of macromolecular polymer long chain of matrix polymer material with a very strong affinity and compatibility, the composite material system processing performance is greatly improved, and the physical properties are not affected.
Five, the method of use:
1, adding filler to the blender, then according to the packing of the weight of 2-3% to join YY - 5035 multi-functional plastic additives, mixing temperature at about 110 ℃ advisable, high-speed mixing 10-15 minutes.
2, this product is a granular or powder, melting point at about 140 ℃, use convenient, suitable for continuous production.
Six, packaging and matters needing attention:
1, lining compound bag packaging, 20 kg/bag.
2, prevent extrusion, sealed away from light, moisture.